Fujifilm Instax Mini Link Starter Kit
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.

Fujifilm Instax Mini Link Starter Kit

Available: In Stock
Rs. 9,299.00 Rs. 10,499.00
Image
  • Order within

 

 

 

 

 

 

Film

Film – Fujifilm Instant Colour Film “instax mini” (separately available)

Film Size – 86mm x 54mm Picture Size 62mm x 46mm

Film Developing Time – Approximately 90 seconds (Varies depending on the ambient temperature)

Recording method

3-colour exposure with OLED

Creative functions

Frames, Collage, Party print, Match Test, Video Print, instax Camera mode, Contrast control, Exposure control, Saturation control, Crop and rotate.

Printing specs

Printing solution – 12.5 dots/mm (318 dpi, 80 μm dot pitch)

Printing levels – 256 levels per colour (RGB)

Supported image format – JPEG / PNG / HEIF

Printing time – Image recording – photo output (fed out): Approximately 12 sec.

Film detection – Yes (Automatic ejection when inserted)

Approximate printing capacity: Approximately 100 prints (from full charge)
* The number of prints depends on the usage conditions.

Battery specs

Battery – Lithium ion battery (internal type: not removable)

Charging function – Built-in battery

Input/Output terminals – Micro USB Micro-B (for charging only)

Printing capacity – Approx. 100 prints (From when the battery is charged fully)
* Varies depending on the conditions of use.

Charging time – Approximately 80 to 120 minutes
(Charging time depends on the temperature and battery remaining level)

Operating environment – Temperature: +5 ºC to +40 ºC (+41 ºF to +104 ºF)
Humidity: 20% to 80% (no condensation)

Dimensions & weight

90.3 mm × 34.6 mm × 124.5 mm/3.5 in. × 1.3 in. × 4.9 in.
(excluding projecting parts)

Weight: Approximately 209 g/7.3 oz (excluding film pack)

Accessories included

USB Cable (for charging)

Instruction manual

 

 

 

 

 

 

Film

Film – Fujifilm Instant Colour Film “instax mini” (separately available)

Film Size – 86mm x 54mm Picture Size 62mm x 46mm

Film Developing Time – Approximately 90 seconds (Varies depending on the ambient temperature)

Recording method

3-colour exposure with OLED

Creative functions

Frames, Collage, Party print, Match Test, Video Print, instax Camera mode, Contrast control, Exposure control, Saturation control, Crop and rotate.

Printing specs

Printing solution – 12.5 dots/mm (318 dpi, 80 μm dot pitch)

Printing levels – 256 levels per colour (RGB)

Supported image format – JPEG / PNG / HEIF

Printing time – Image recording – photo output (fed out): Approximately 12 sec.

Film detection – Yes (Automatic ejection when inserted)

Approximate printing capacity: Approximately 100 prints (from full charge)
* The number of prints depends on the usage conditions.

Battery specs

Battery – Lithium ion battery (internal type: not removable)

Charging function – Built-in battery

Input/Output terminals – Micro USB Micro-B (for charging only)

Printing capacity – Approx. 100 prints (From when the battery is charged fully)
* Varies depending on the conditions of use.

Charging time – Approximately 80 to 120 minutes
(Charging time depends on the temperature and battery remaining level)

Operating environment – Temperature: +5 ºC to +40 ºC (+41 ºF to +104 ºF)
Humidity: 20% to 80% (no condensation)

Dimensions & weight

90.3 mm × 34.6 mm × 124.5 mm/3.5 in. × 1.3 in. × 4.9 in.
(excluding projecting parts)

Weight: Approximately 209 g/7.3 oz (excluding film pack)

Accessories included

USB Cable (for charging)

Instruction manual